Ready for a good and conscious suntan? Let’s know better sunscreens…

solariA wonderful sunny day could really change our mood, it allows us to better face daily routine and enjoy the outdoor benefits. A sunny day brings us back to positive thinking, energy, beauty and health. However, we should not forget all the implications of sun-exposure, in order to benefit from sunlight avoiding the related risks, caused by solar over-exposure. Let’s better understand what sun exposure really implicates, knowing that uneven solar exposure can cause not only tiny sunburns, but also it could increase incidence of certain forms of skin cancer.

Sunlight is composed by different bands characterized by their wavelenght (λ) and energy: a portion of such radiation is represented by ultraviolet (UV) rays

  • UVC rays (λ = 40 ÷ 286 nm) are filtered off by atmosphere ozone and they don’t reach Earth surface in considerable amount.
  • UVB rays (λ = 286 ÷ 320 nm) stimulate melanin formation even though they penetrate only partially through skin, and are the main responsible for suntanning. They act superficially on epidermis and can damage skin cells, determining inflammation and sunburns, due to their high energy.
  • UVA rays (λ = 320 ÷ 400 nm) represent the majority of UV radiation,  they deeply penetrate through skin and cause damage to underlying tissues, they provoke skin ageing  and contribute to pathologic phenomena. They also give rapid suntan using the already-formed melanin.

Cosmetic sunscreens play a major role in skin safety, they represent a strong defence for our skin and contribute to effectively protect it from sunlight. Since September 2006 European Commission has set directives for a perfect solar protection formulation: it must screen efficaciously from both UVA and UVB rays. EU directives compel cosmetic manufactures to display clear labels in terms of efficacy and claims of sun-care products. BeC, as a cosmetic manufacturer, has been working seriously to assure the best performance of sun-care products, with the added value of the  essential oils, the emollient, soothing and antioxidant actives that play a key role for comprehensive sun protection. They sooth erythema, while blocking skin photo-aging, beside cutting off UV rays.

Let’s better know which sunscreen are allowed in EU in cosmetics, according the Regulation (EC)   No   1223/2009   of    the   European   Parliament and of the Council of Europe:

  1. para-aminobenzoic (PABA) acid derivatives screen UVB rays with absorbance maximum peaks between 285 and 310 nm.
  2. Cinnamates (e. ethylhexyl methoxycinnamate) are able to protect from UVB rays behaving also as quencher of excited species produced by solar radiation. They absorb radiation at maximum wavelength around 310 nm.
  3. Benzylidencamphor derivatives screen UVB rays and are quencher as well.
  4. Dibenzoylmethane derivatives protect from UVA rays.
  5. Benzophenones absorb both UVA and UVB rays.
  6. Salicilates boast a moderate absorbing efficacy in UVB region, with absorbance maximum at around 305 nm.
  7. Triazines, i.e. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine, are excellent photo-stable sunscreen covering the wide range of UVA and UVB.
  8. Diphenylcyanoacrilates, i.e. Octocrylene represent a good wide range UVA-UVB sunscreen.
  9. Titanium bioxide and Zinc oxide represent physical sunscreen characterized by full UV-range coverage and reflecting action with sunlight scattering properties.

BeC sun-care products are based on a careful combination of the best photo-stable suncreens (physical and chemical) in order to assure complete coverage of the UV spectrum.

The special formulation and the efficacy testing on human volunteers assure a totally safe and perfect suntan. To this aim, the sunscreen of Creme solari (SPF 6, 15 , 30 e 50+) covers the full protection range so to perfectly match your specific photo-type. Special attention is devoted to deliver super-fine and even dispersion of the UV-filter in the formula, so to assure a uniform protection and suntan. Ingredients’ quality, mostly from natural origin (100% natural in case of SPF6) makes these products fully skin-compatible, suitable also for the most delicate skin-types.

As we anticipated, BeC sun care products are not only made of sunscreens! Along with natural components which stimulate melanogenesis (ATP, tyrosine and riboflavine – vit. B2), making suntan more rapid and intense, i.e. aiding skin self-protect, BeC sun care products are rich of hydrating and soothing actives, which nourish our skin and contribute to re-equilibrate physiologic skin moisture and elasticity. Daily use of BeC suncare products avoid damages caused by sun over-exposure but also effectively increase hydration and elasticity!
Natural Vitamin E contained in every BeC sun care product helps prevent wrinkle formation and premature skin ageing along with defending skin from the action of free radicals involved in radiation mediated inflammatory processes. BeC sun care line acts by preventing sun damages: this is especially the case for the oil Huile SolÈ® that is particularly rich in vitamin E. Efficacy tests have shown that daily use reduces already formed wrinkles by 12% in only one week of treatment! This is an outstanding result!!!

BeC sun care products are designed to let us enjoy full benefits from sunlight, while reducing risks and side effects such as allergies, photo-sensitization and skin ageing. In order to protect skin from harmful radiation, our careful sun care formulation stimulates natural skin defence and guarantees a perfect and uniform suntan leaving hydrated, elastic and silky skin. The soothing action on irritation and the prevention of risks associated to free radicals – that causes premature ageing – complete the special properties of our sun care line.

Let’s benefit from a good suntan without turning down an excellent solar protection!

Earth Day, a little help for our Planet!

Earth-DayWe are now entering the 46th year of Earth Day, the occasion that constantly attracts the interest of critical and eco-friendly consumption. Several challenging ideas and good actions are on the table to ignite passion and motivate people to action in saving our Planet. In 1970, the year of the first Earth Day, the movement gave voice to an emerging consciousness: channeling human energy toward environmental issues. Forty-six years later, earth day movement continues to lead with groundbreaking ideas and with the power of a simple example: TREES for the EARTH, let’s plant 7.8 billion trees for the Earth! Let’s divest from fossil fuels and make cities 100% renewable. Among principal goals of Earth Day, there is the need to promote a major consciousness in the citizens with respect to purchases and life-style. Hoping that the decision makers will be guided by means of strict criteria of social and economic sustainability.

In our own small way, how can we contribute to the main goal of environmental protection and promote ethic and eco-friendly consumption?  BeC, as a natural cosmetics company, has recently devoted a growing attention toward organic and eco-friendly cosmetics, for this reason we created our organic cosmetics line Terra biocare. Beside having a high amount of ingredients coming from organic farming, the organic cosmetics have low impact on environment during each production process. Indeed, even natural ingredients will not allowed in a certain formulation if they do not guarantee low environmental impact. Such  attention includes packaging materials in the overall supply chain. In eco-friendly cosmetics development, particular attention is paid to the easiness of waste management in the overall supply chain.

On the occasion, we report here an abstract of an interview by CosmesiDoc where we’ve been asked how sustainability issues could be linked to the cosmetic world:

Environmentally conscious consumers address their attention to environmental protection by choosing not only sustainable food but also eco-friendly wellness products. In particular, organic cosmetics are eco-friendly products that represent the harmony between Man and Nature. Our certified organic cosmetic line is directed to everyone who wants to approach a more conscious, ethic and eco-friendly life-style, without sacrificing their efficacy. This very relevant point deserves further attention: if consumers give away their full satisfaction with the efficacy of a certain product, sooner or later they will be disappointed and will change their mind, the will go back looking for something that better meets their actual needs.  It would be a failure! It is important that organic products have good efficacy and fully satisfying performance, in order to be perceived not as a renouncement. The environmentally conscious choice will then be sustainable in the long-term for the consumer… that is really sustainable!

However, BeC commitment to the environment does not deal exclusively with the organic Terra biocare line: since long ago, BeC has been adopting an integrated Quality and Environment Management System, for R&D, production and commercial activities, according to the international standard ISO 9001 (Quality) and ISO 14001 (Environment). The system guarantees the continuous improvement, year by year, of both the performance and the monitoring of environmental impact, prompted by previously achieved results. Among the pursued goals, BeC uses only certified FSC paper as material for secondary packaging of all products. This guarantees the responsible management of forests and the sustainable handling of natural resources.

Environmental protection, ecology and sustainability are the driving forces that have to lead industrial production, from little craft business up to the big industrial firms, wishing more awareness for every actor of the supply chain. Thanks to Earth Day, let’s commit to promoting knowledge and exchange of ideas for an eco-friendly and better future… the Earth will thank us!

Springtime: let’s take care of our hands and feet!

PiediManiHave you ever thought about how hands are important in our life? Hands clearly substitute a missing word in a conversation,  give love with a caress, carry out our daily activities. Our hands powerfully communicate: they are our business card. They barely lie to us about age and they reveal evidently age’s signs, when detracted.

How many times our hands are subjected to continuous injuries? Let’s think about the simple gesture of washing hands with ice-cold water, changing suddenly from warm to frozen places during winter or using harsh detergents in home cleaning activities. After such a harsh treatment, our hand skin become certainly red and dry. Our skin – being the first defense barrier – is made of hydro-lipidic film, which naturally protects our hands from environmental changes but it has a limited resistance. Our hands are more fragile than other body areas due to the limited amount of sebaceous glands, that make them more subjected to dryness. Moreover, they are always exposed to sunlight, also during winter.

You should everyday protect hands from external injuries, re-equilibrating natural hydrolipidic protective film with the aid of a suitable nourishing and moisturizing cream.

The hand cream GlovÉ is a complete wellness treatment for hands with protective, moisturizing and elasticizing action. Precious elements, such as natural ceramides  and  vitamin E along with pure essential oils and  distilled water rich of oligoelements, give elasticity and hydration to the skin tackling redden skin and irritations. With a silky texture and  a gentle non-greasy touch, the hand cream represents an invisible glove that naturally protect hands from external injuries, such as cold, detergent and chemical compounds.

maniepiedi_aprileFeet deserve equally our attention especially during springtime when they usually are exhibited. Even if they are in the spotlights during summertime, they should not be detracted during the rest of the year. In foot reflexology, body shape is compared to a tree: roots correspond to feet, trunk is our spinal column whereas leaves are represented by face. According to this methodology feet maintain the microcosm of human being so that they should be kept stable and healthy. If they are neat and beautiful, they could be appealing, especially when uncovered.

In spite of not being so prominent, feet should paid a special attention too. C.R.P. foot cream is  specifically designed to give relief to tired feet and attenuate problems related to strong dryness, such as hard skin and calluses. Talc, with the absorbing action, reduces abundant sweat whereas Tea Tree oil and the antiseptic essential oils help in protecting feet from mycosis and from excessive bacterial proliferation caused by closes shoes.

Beauty wakes up during springtime! Let’s take time to regenerate and shine our hands and feet with dedicated specific treatments.

Ingredients’ purity: efficacy and safety

I have been frequently come across in cosmetic company websites which excessively boast the importance of purity of vegetal extracts for the efficacy of cosmetic products. I end up with catchy phrases such as “…our cream is the most effective product on the market, because our Ginseng dry extract e is assayed 10% in  ginsenosides differently to the majority of competitors who use 3% assayed Ginseng…”

glass-containers-1205652_1920Well, let’s clarify the topic in two points:

  1. Efficacy is associated both to the extract purity and to the used amount in formulation
  2. If certain extract is assayed in 60% of something, what is the remaining 40%?

The first point is related to the fact that an extract 100% pure could be ideally used. For instance,  using one tenth of a certain ingredient in the formulation means that a less effective product (or with lesser amount of ingredient) it will obtained in comparison to the use of the same amount of the less pure extract. The real amount of the active extract in the final formulation relies on the efficacy of the product.

The second most important point is linked to safety of the cosmetic product: a botanical low-percentage pure extract will contain higher amount of impurities (extraction solvents / not declared components) in comparison to purer extract.

Modern cosmetic science crosses over pharmaceutical field so that we usually talk about cosmeceutics that support the topic that the functional and technical ingredients (commonly known as excipients) play a major role in activity along with the proper active ingredient. For instance, we demonstrated the ability of certain essential oils or fatty acids (from vegetable origin) to behave as enhancers for cutaneous absorption for some hydro- or liposoluble vitamins. The results were published in some relevant scientific journals.[1-4]

Definitely, ingredients’ purity relies on high percentage of the active ingredient: the purer is the extract, the lesser is the room for unknown ingredient and dangerous components (additives, plasticiser, solvents, dyes, etc.) in the formula.

I’d like to highlight the importance of quality and purity of the extracts and active ingredients to be used in cosmetic formulation in order to assure efficacy and safety. At last, don’t be fooled by advertising slogan which reveal meaningless at the end.

[1] S. Gabbanini, E. Lucchi, M. Carli, E. Berlini, A. Minghetti, L. Valgimigli, In vitro evaluation of the permeation through reconstructed human epidermis of essentials oils from cosmetic formulations, J. Pharm. Biomed. Anal. 50 (2009) 370–376.
[2] S. Gabbanini, R. Matera,  C. Beltramini, A. Minghetti, L. Valgimigli. Analysis of in vitro release through reconstructed human epidermis and synthetic membranes of multi-vitamins from cosmetic formulations J. Pharm. Biomed. Anal. 52 (2010) 461– 467.
[3] L. Valgimigli, S. Gabbanini, G. Arniani, E. Lucchi. Influence of the lipid-phase composition on the trans-epidermal transfer of vitamin B6 from O/W emulsions. HPC Today, 2013, 8, 24-27.
[4] L. Valgimigli, S. Gabbanini, E. Berlini, E. Lucchi, C. Beltramini and Y.L. Bertarelli. Lemon (Citrus limon, Burm.f.) essential oil enhances the trans-epidermal release of lipid- (A, E) and water- (B6, C) soluble vitamins from topical emulsions in reconstructed human epidermis, International Journal of Cosmetic Science, 34 (2012) 347–356.

Skin damage caused by “wrong” sunscreens: the photosensitization phenomenon

 creme solari becAs we have seen in the previous post, many sunscreens get damaged by sun radiation as they absorb it. The modest photo-stability of such sunscreens has important consequences on the safety and efficacy of sun-care products based on them. In the previous discussion we have seen that photo-instability of sunscreens causes a reduction of sun protection factor (SPF) with time. There are, however, additional interactions of sunscreens with sunlight that have even worse consequences on their safety. We will discuss them in this article.
Solar radiation contains sufficient energy to damage some molecules (M), including some molecules found in our skin, as exemplified in the equation:

M + light→ fragment-A + fragment-B

Fragments indicated as A and B, in the example above, are often free radicals that can attack other molecules, damaging or modifying them. For instance, if such a reaction occurred in our skin, damage could occur to structural proteins like collagen and elastin, contributing to the formation of wrinkles and the onsetting of photo-aging. Furthermore, it could start chain-reactions leading to erythema, other inflammatory states and even genetic mutations (skin cancer). Products containing sunscreens are meant to protect skin from all such damages, and normally they do, by decreasing the amount of UV radiation that hits our skin, i.e. acting as “filters”. But CAUTION !!! Not all the sunscreens are friends of our skin, and actually some might cause bigger damage than that they are expected to prevent. How?
Let’s go back to our previous example. In order for M to react with light, it is necessary that molecule M is at least able to absorb the light at quantum level, i.e. it is necessary the energy carried by light photons hitting M corresponds exactly to the energy gap between quantum levels in the molecule. Often this is not the case and molecule M would be perfectly “safe” if it was not for the presence of other molecules called photosensitizers.

benzofenone

Benzophenone and main benzophenone derivatives used as sunscreen in sun-care cosmetic products as well as in the protection of manufacts. The common base structure is drawn in blue

F + light F*  

then…

F* + M F + fragment-A + fragment-B

This process is well known in photochemistry and benzophenone is among the photosensitizers of broader use in industrial processes to induce photochemical reactions. Benzophenone is also the lead structure for many and, unfortunately, very popular sunscreens, widely used in sun-care cosmetics to give sun protection factor. Most common examples are depicted in the figure above. Sunscreens like benzophenone-3 and benzophenone-4 are structurally related to benzophenone and are potent photosensitizers. In case M is a biomolecule in our skin, such as collagen, elastin, an enzyme or DNA, this can be damages by exposure to sunlight in the presence of photosensitizers (like benzophenone derivatives) much more it would happen in their absence. In other words, certain sunscreens can amplify the damage to our skin caused by sunlight.

Many benzophenone derivatives are available today and 12 of them are of common use.  Those more commonly used in the manufacture of sun-care cosmetics and other goods, are listed in the following:

Benzophenone-1: 2,4-Dihydroxybenzophenone
Benzoophenone-2: 2,2′,4,4′-Tetrahydroxybenzophenone
Benzophenone-3 (or oxybenzone): 2-Hydroxy-4-methoxybenzophenone
Benzophenone-4 (or sulisbenzone): 2-Hydroxy-4-methoxy-benzophenone-5-sulphonic acid
Benzophenone-5 (the sodium salt of sulisbenzone): Benzenesulfonic acid, 5-benzoyl-4-hydroxy-2-methoxy-, monosodium salt
Benzophenone-8 (or dioxybenzone): 2-Hydroxy-4-methoxyphenyl)-(2-hydroxyphenyl)methanone
Benzophenone-10 (or mexenone): 2-hydroxy-4-methoxy-4′-methyl-benzophenone
Benzophenone-11: it is a mixture of benzophenone 2 e 6.

For these reasons BeC does not use benzophenone derivatives in sun-care products !!! BeC uses only physical filters in low protection products and, in high protection products, we use a combination of physical filters and new generation chemical filters, which are highly photostable. Here you can find more info on BeC sun-care products.

Therefore, when we chose a sun-care product, it is very important we pay attention to the label and read the composition: don’t look at the SPF value only!

We often hear that we should not expose to sunlight after having used perfumes or other products, as they can give photosensitization problems. The typical recommendation is to use only sunscreen products, but caution should be paid when we choose the sunscreen product, as even sunscreens can cause the same problems. Therefore, even if you have no particular problem of sensitivity to sunlight and think that any product will do the job, think again and don’t overlook the importance of choosing high quality sunscreens, so to make sure that the problems you don’t have will not be caused by the wrong product.

Photo-degradation of sunscreens and skin damaging

soleWe have previously discussed the mechanism of action of sunscreens, underlining that chemical sunscreens absorb the energy of sunlight and subsequently re-emit it in the form of heat, possibly without any alteration in the structure of the sunscreen itself. Possibly… does it always go this way? Unfortunately it doesn’t. For this reason we wish to discuss here a bit more on the photostability of sunscreens. Although this aspect is often overlooked (guess why?), it has major consequences on our health.
After having absorbed sunlight energy, chemical sunscreens are in a higher quantum energy state, from which they can undergo one of three processes:

  1.    they can go back to the lower energy state by loosing energy in the form of heat (which is often not perceived by our senses), thereby making ready to start over again and absorb more solar energy;
  2.     they can release the excess energy by breaking their structure into fragments, i.e. they degrade and form free radicals or use the energy to react with other molecules (photochemical reactions);
  3.     they can transfer the excess energy to another molecule by “hitting it”, i.e. they behave as photo-sensitizers.

Ideally, sunscreens should use only the first route; however, not all the sunscreens are identical and some of them, which are less stable than others, after several absorption-emission cycles, may take the second route (we will discuss in a following post of those sunscreens that take the third route and act as photosensitizers).
If the sunscreen degrades, it most commonly produces free radicals and other dangerous species. If the sunscreen has been absorbed deeply into our skin, those free radicals can attack and damage proteins and DNA, accelerating the photo-aging processes of the skin. In high quality formulations such damages can be prevented by the abundant presence of antioxidants (e.g. vitamin E) in the formula, so to block free radicals before they can cause any damage. Therefore, it is very important to always choose high quality products after careful reading of their label.
There is, however, another point to take into account: as the sunscreen degrades the solar protection factor (SPF) of the product progressively decreases. And antioxidants cannot help in this reguard.

photo-degradation_EN

Variation of the UV-Vis absorption spectra of two examples of sunscreen formulation, after exposure of the formulation to the same “dose” of sunlight (UV irradiation). The upper graph refers to a formulation with NON photostable sunscreens, which evidently shows a reduction of the spectrum after UV exposure, meaning a marked decrease in the SPF. The lower graph, instead, shows the behavior of a (BeC) formulation with photostable sunscreens: only negligible variation of the spectrum is displayed after irradiation implying no loss of SPF and more durable performance.

The fact that a sunscreen formula looses its SPF on exposing to sunlight depends on the phostability of the sunscreens: with highly photostable sunscreens the phenomenon has negligible relevance; however, with little photostable sunscreen molecules, which are unfortunately the most common in commercial formulas, the phenomenon is very relevant, as illustrated in the graphs on the left, displaying the comparison between two real formulations: a famous commercial products (don’t ask which one) and BeC sunscreen SPF15 cream.
Many of us think that “waterproof” sunscreen formulas – which can resist for several minutes of swimming in seawater – would provide a safer protection for the entire day, since the product would not be washed away. A look at the graphs clearly tells that this is not the case: a waterproof sunscreen formula does not guarantee safer daylong protection. First of all, we should consider whether the sunscreen contained in the formula is photostable!!! Secondly, we should consider that, even if the sunscreen is photostable, during a typical day at the seaside, we dry ourselves with a towel; we roll up in the sand, which we clean up by rubbing or washing our skin; we sweat in the heat or during physical activity (e.g. beach sports). All such actions end up removing the sunscreen form our skin anyway. Therefore, a high quality sunscreen formula, based on photostable components, is the ideal choice for a safer protection, but we should not forget that it is wise to re-apply the product several times during the day, particularly in the case of children.

UV filters in sunscreens: things we should know on their nature and functioning

Sunscreens or UV filters are natural or synthetic compounds that are included in cosmetic formulations to protect the skin from damages caused by solar exposure. In the case of specific sunscreen formulas (to be used for sunbathing), they are responsible for the Solar Protection Factor, SPF, whose value indicates the degree of protection the formula will guarantee to our skin, thereby avoiding erythema and other damages like photo-aging. What do UV filters exactly do and how do they act? The principle is very simple: UV filters reduce the amount of solar radiation reaching the surface on which they are applied, for instance skin surface. The difference among the many UV filters lies in the mechanism by which they achieve this goal and they can be grouped in two categories.

Physical and chemical filter - effecto on skin

Mechanism of action of physical and chemical filters on the skin

Physical filters reflect (back) a portion of solar radiation, letting only a limited fraction of light cross them and reach the skin. Therefore, they do not interact with solar radiation and they are not altered by it at all. Chemical filters, instead, absorb a portion of solar radiation, and use it to achieve a higher quantum energy state. Immediately after, such excess energy is released to the environment in the form of heat, thereby making the filter ready to absorb solar energy again. The different mechanisms of action are summarized in the picture on the left. In both cases, the amount of solar energy allowed to pass – which is not reflected nor absorbed – depends on the amount of filters applied on the skin, which determines the solar protection factor.
Both types of filters offer advantages and disadvantages: physical filters have the advantage of being completely stable and not being damaged by solar radiation. Furthermore, compounds like Zinc oxide are totally inert and are very safe for skin. Their disadvantage lies in the difficulty to reach high SPF values without causing the so-called “white effect”. In order to reduce this effect, it is possible to use them in micronized form, which is much more precious (BeC uses this form in all sunscreen formulas). However, even micronized forms do not allow reaching high protection without becoming “visible” on the skin. Therefore, in high protection formulas they are usually combined with chemical filters. Chemicals filters, infact, have the advantage of being very effective and of offering excellent performance while being completely invisible. They disperse very well in the formulation affording a more homogenous protection (corresponding to a more even tan!); however, since they absorb the solar energy, they are subjected to the risk of photo-degradation, or they could undergo photochemical reactions.
At this point, let’s better clarify a very important aspect. Often, the expression “chemical filter” is confused with “synthetic filter”, i.e. artificial, while it is generally believed that physical filters are natural. This is not necessarily true! Physical filters are normally inorganic, i.e. minerals, and normally they are natural, but they can as well be synthetic, i.e. artificially produced.

Oryzanol

gamma-oryzanol: a natural “chemical” filter extracted from rice

On the other hand, the most common chemical filters are often synthetic, i.e. man made; however, there exist also examples of natural chemical filters. Among the most impportant ones, there is certainly gamma-oryzanol, which is extracted from rice bran (see picture on the left), and other examples are cinnamic acid, typical of cinnamon but found also in Brassica vegetables (cabbage, broccoli, etc) and in shea butter, carotenoids(e.g. from carrots, tomatoes and several red-orange fruits), Vitamin E and many more. These compounds have also the advantage of possessing additional properties (e.g. antioxidant, soothing, calming, anti-age); unfortunately, however, they are nor as effective as synthetic chemical filters. BeC uses natural chemical filters when high SPF values are not requested (e.g. in Huile SolE’), and combines natural and synthetic chemical filters when high protection is aimed at.

The take home message is: don’t be fooled by the words! The adjectives Chemical or Physical, for filters, indicate their mechanism of action not their origin. The origin can either be natural or synthetic, but the most important aspect is their stability toward solar radiation, which is fundamental for our safety under sunlight.

Terra biocare: the importance of organic certification

terraecocertMany certification bodies can provide control and certification of cosmetic products (and its ingredients) in order to meet some standard requirements for natural or organic labelling. We have already discussed the differences between the natural and organic concepts, so we now focus on organic the products belonging to our eco-friendly cosmetic line Terra biocare, with was formulated with high content of ingredients of vegetable origin and coming from organic farming. At BeC we have chosen Ecocert Greenlife certification for our organic cosmetics entrusting this independent certification body Ecocert, founded in France more than twenty years ago with the aim to develop and support those agricultural techniques that have full commitment to respect and protection of the environment. The basic principles of Ecocert standards consider that the eco-friendly cosmetics should be made only of ingredients deriving from renewable sources and produced by procedures with a reduced impact on environment. Basic requirements to be met according Ecocert accreditation are the absence of GMO (genetically modified organisms), of synthetic preservatives such as parabens and phenoxyethanol, of synthetic parfums, of nanoparticles, of silicones, of PEG polymers and dyes, along with ingredients from animal origin (other than those naturally derived, like milk, honey etc.). Moreover, packaging materials are required to be biodegradable and recyclable. The ORGANIC COSMETICS label validated by Ecocert on our cosmetic products Terra biocare certifies that they contain at least 95% of ingredients of natural origin, and at least 95% of vegetable ingredients (however not less than 10% of the whole amount) comes from organic farming. All natural and organic ingredients of Terra biocare are obtained by means of simple extraction procedures approved by the certification body, which have minimum impact on the environment.
 The organic certified cosmetic line Terra biocare is dedicated to everyone who wants to approach a more conscious, ethic and eco-friendly life-style, without sacrificing efficacy. Terra biocare, with its fresh and simple personality, is effective but delicate and is ideal for people who want to contribute to minimizing the environmental impact.  Top quality products made for an environmentally and socially responsible life-style, in the  fullest harmony between Man and Nature.